Bison Hide Leather Guitar retailer Strap -- choice of 4 colors

This is a very simple strap made with a wonderful "shrunken" bison hide by Montana Leather Company and the tanning process "shrinks" the overall size of the hide down about 30%, creating an amazing grain pattern that is more pronounced and random is size & orientation that other tanning methods, and also has a wonder "leather" aroma.

This listing includes four color options for "standard" 2 1/2" wide and about 48-58" long with 1" adjustment, which includes the Whiskey which as shown in the photos of a strap on its own:
>Black (Sept 2021: new hide, slightly thinner than others)
>Red
>Dark Brown (Sept 2022: new stock has burnished/smoother underside)
>Whiskey--back in stock Mar2022! though back is "pressed" and smoother...

Please do inquire before ordering if you need a longer length--sometimes I can accommodate that.
For shorter, please just specify the optimal length you need peg hole to peg hole, if the "standard" range doesn't work for you.

For some I have a "Traveler" size--2" wide and about 44-54" long.

The leathers are all thru dyed, which is indication of higher quality leather, and the grain top side is polished, and color has subtle variations as much as the texture. The underside is typically a bit lighter shade than the polished top grain. Please note the red has had some difference lot to lot, so newer straps the underside may vary in shade from that pictured).

This leather is also 7-8oz thick (about 1/8"), but is mellow temper, and is very supple and soft to the hand and the split sueded underside is very soft--it may ease a bit, as most leather does, but it will not stretch. It's deceptively soft & supple for its strength.

The main strap is hand cut to 2 1/2" wide and tapers slightly at either end, and is about 42" long. I have softened the cut edges with a small bevel tool, so there is a gentle transition from the top surface to the edge.

Eleven adjustment slots are cut about every 1", and the 1" wide adjustment strap loops through the chosen slot and is woven through the other slots to provide the desired length and fixes to the back pin on the guitar.

I cut the adjustment strap to about 22", with about 18" to the peg hole, so the overall length can be adjusted from about 48" to 58" between the peg holes, and *"shorter" is about 45-55". But since I cut these myself, I can easily modify the length or spacing to get the fit that works for you. Or you can add more peg holes in this back strap for finer adjustment as you wear it in.

The holes for the front peg is punched at 5/16", and rear tab is 3/8". Each end has a small slit that ends with a small hole for a "keyhole" effect to prevent tears and to make the strap easy to install & remove. The hole and can accommodate most pegs, but remains securely in place. If you have a specific peg size you need to fit, please let me know.

This is also laser etched a few inches above the front peg hole (on flesh side) and on the grain side of the adjustment strap with my new brand, Acoustic Needle, logo.

The design means the strap is only leather, and there is no metal or plastic hardware that could annoy you while you're playing, or your knock into you instrument while it's being moved or stored.

Bison leather has higher tensile strength than cowhide, and is very strong and tough, yet this hides are not stiff, and are supple enough to roll up tight into your case, and will hold acoustic, electric, and even bass guitars well.