HEXTECH - Delta Drop Base - Research Set (Battletech/Epic retailer 40k/Titanicus/Terrain/Buildings)

HEXTECH terrain is completely compatible with the Battletech Tabletop game as it features an optional hex base system. Players can leave the hex bases off and use them terrain in a variety of other games such as Epic 40k and Titanicus.

The Delta Base has the new HEXTECH UNIVERSAL basing system, which gives you the ability to switch between hexed and hexless play in seconds. The Universal bases have an optional magnetic system that can be used to enhance the feature.

Delta Base Corridor Walkway Bridges come in a variety of connection types, meant to extend, bridge and slot into the various buildings in the set. Each Walkway is a single hex and is modular in its nature so you can mix it up for every battle.



MAGNET Readme

Magnet size: 1/8" x 1/16" or 3x2mm will give you a good fit. Some simple trimming on the sockets may be required to get a good fit, use a sharp knife and be careful.

Polarity Tip: If you socket one polarity to all the "Male" ports and then the opposite polarity to all the female
ports/sockets, you will avoid problems with pieces having conflicting polarity. This will require a bit
of organization in advance, and we recommend you save the magnet installation until you've printed the entire
kit and do the installation all at once so you don't have to keep track of it over a long period of time.

Magnets not included.


These are 3D printed on FDM Printers in our professional commercial facility. For more information about retailer the product please read below.

__________________________________________________________________________________



Research Set:

(4) Closed Personal Habs
(2) Open Personal Habs
(1) Power Station
(1) Closed Industrial Prefab
(1) Half Deployed Industrial Prefab
(3) Corridor Walkway Bridges



__________________________________________________________________________________


The product is printed in a biodegradable plastic called PLA. We use only the finest material in our machines, and operate a full time Printer Farm of 64 machines to ensure the product you order today arrives in a timely manner and exceeds your expectations. We stock all our products that are listed on Etsy in advance so orders should be processed within 48 hours maximum. Product will usually be printed in a grey material, however colour may change without notice depending on supply shortages. Our prints are high quality and require no post processing on your end, simply prime and paint (we recommend a filler primer such as Krylon).