Wheel Offset Measuring Tool - retailer 3D Printed - Template - JDM - Racing

retailer DEALER / WHOLESALE PRICING NOW AVAILABLE!

====================================================

As the authorized producer of this tool, we can't say enough good things about it!

This essential tool takes the guess-work out of determining rim fitment on your car!

It quickly and easily shows how a rim's diameter, width, and offset will line up with the fender of your car.

This can measure wheels in the following ranges:

• Wheel diameter from 13 inches to 20 inches
• Wheel width from 7 inches to 13 inches
• Wheel offset from -40mm to +40mm
• Compatible with 4 and 5 lug hubs
• Available in PLA+ and ASA filament for a stronger, more durable final result.

Please take other factors into consideration such as inner wheel well clearance with the tire, brake rotor and caliper clearance, suspension clearance, etc. This tool will only assist in finding the appropriate offset as to how the outer edge of the wheel aligns with the fender opening.*

This product is 3d printed to order and lead time will vary depending on production demands.

All hardware is supplied and some minor assembly is required.

*When setting up this tool, please double check accuracy of the measurements by tape measure with the hub on a flat surface. The built in measurements should be used as a guide for setup, then fine tuned by tape measure. We are not responsible for incorrectly ordered wheels due to the use or misuse of this product.

Safety first! Observe all safety precautions when working on and around your car.

If you have a 3D printer and would like to print your own, the STL file can be acquired at www.claytonramstead.com