Retailer Stellan Gios Lightsaber Hilt (3D Printed)

You will receive all of the pieces required to build the Lightsaber hilt (no blade) . Base color will vary depending upon available filament, but for the most part I will attempt to use the base color of the saber that you choose.

Print time will be 4/5 days depending upon the lightsaber chosen.

Definitions of finishes:

Raw: The pieces will come direct from the printer. I will ensure that all support material has been removed, however you will need to sand. assemble and possibly fill pieces prior to painting it yourself.

Sanded/Finished: The saber hilt will be sanded down smooth and will be glued together and, if necessary, filled wherever required.

Painted: Just like the "sanded/finished" description above, but also painted in the correct colors to be screen accurate.

This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability.

Please note: These are 3d printed display sabers intended as cosplay props or for display pieces. They are not intended as toys or play pieces and will likely break if used in such a way.

I did not make the model for this. I am selling this with permission for thingiverse user casestudyno8 who made the model.
you can find his page here: https://www.thingiverse.com/casestudyno8/designs retailer